Description - Chemipro SAN 500ml
Discover this new addition to the Chemipro range!
A high-foaming, acidic anionic final rinse for use in the food and beverage industry.
- cleans tanks and equipment spotlessly and avoids the build-up of minerals
- is not affected by organic pollution
- only requires a contact time of 60 sec.
- not suitable for soft metals and CIP systems
- dosage: 15 to 25 ml/10 litre
Directions for use: to be used as a rinse after thorough cleaning with a good alkaline detergent such as Chemipro Wash. Use 15 to 25 ml of Chemipro San per 10 litres of water. Apply on surface with a cloth, sponge, soak or spray. Rinse only with clean potable water.
Close the packaging tightly after use and store in a dry, cool and well-ventilated place. To prevent leakage, always store the packaging in an upright position.
Do not mix Chemipro San with chlorinated cleaning agents as chlorine gas will result.
Keep out of reach of children.
Chemipro San is a registered detergent
Tips: bruk gjerne ei sprayflaske, og spray alt som skal i kontakt med ølet (gjæringskar, gjærlås, pakningar, krane, slangar, flasker osv.)
Blandingsforhold:
1/2 OZ (15ml) på 9L vann
1/4 OZ (7,5ml) på 4,5L vann
ADVARSEL!
Etsende middel, inneholder fosforsyre. Må ikke svelges. Pass på å ikke få konsentrert middel i øynene, på huden, klærne eller på kjøkkenbenk. Kan forårsake flekker på kjøkkenbenk i konsentrert form! IKKE BLAND Chemipro SAN MED KLORIN HOLDIGE MIDLER, KLORIN GASS VIL OPPS.. Ikke bruk nær varme eller åpen flamme. Se etikett for mer informasjon.
Datablad kan lastes ned her.